alloys bored in the midlands

General Technical Questions and Answers last answered over 1 year ago.
You may also want to visit the Wiki(pedia) for a more structured index of T25 repair, maintenance, technical and ownership topics

Moderator: Moderators

Forum rules
You cannot post in this Archive forum (read only).
If you require to re-raise one of these topics in the live 80-90 forums, please insert a link to it in your first post.

alloys bored in the midlands

Postby richardprint » 28 Feb 2009, 19:26

hi, i've just brought a nice set of audi A3 alloys the stud holes need boring out. does anyone no where i can get this done in the midlands area, as close to Evesham/Stratford as possible. if anyone has any idea how much this would roughly cost that would be helpful too.

thanks Rich
richardprint
 
Posts: 30
Joined: 17th, Feb 2009
Location: Nr Evesham
80-90 Mem No: 6416

Re: alloys bored in the midlands

Postby Fritz » 01 Mar 2009, 00:03

Have you tried 'Googling' engineering services in the Evesham area,,,,,,,I have and found quite a few to go at....


Regards



Fritz,,,,,,,,,,,,,
One day you will find me,,
Driving in my Camper,
With a Surf and Paisley wrap on both sides....
Fritz
 
Posts: 1608
Joined: 17th, Jul 2006
Location: Ormskirk, Lancashire
80-90 Mem No: 380

Re: alloys bored in the midlands

Postby richardprint » 01 Mar 2009, 08:23

ok mate, thanks for the suggestion i tried googling before but was unsure as to what to be searching.

cheers
richardprint
 
Posts: 30
Joined: 17th, Feb 2009
Location: Nr Evesham
80-90 Mem No: 6416


Return to Technical Questions and Answers (archived from live forum)

Who is online

Users browsing this forum: No registered users and 21 guests