Today's efforts

Syncro 4&4 Discussion and Q&A last answered over 2 years ago.
You may also want to visit the Wiki(pedia) for a more structured index of T25 repair, maintenance, technical and ownership topics (browse for Syncro links)

You can find further syncro specific information on the Syncronauts website.

Moderator: Moderators

Forum rules
You cannot post in this Archive forum (read only).
If you require to re-raise one of these topics in the live 80-90 forums, please insert a link to it in your first post.

Today's efforts

Postby aruntaylor » 25 Mar 2014, 20:50

Today I managed to:

Tank:
New breather valves and seals, inspected and re fitted breather pipes.
New sender and seals and cleaned up connections.
Re fit tank with stainless straps
Fit filler pipe and seal and breather and plastic trim

Drivers side:
Re fit trailing arm with new bolts ( new bushes fitted last month )
New Spring/plates/shock/bolts
Hub etc ( new bearings fitted last month ) new washers
Complete brakes fitted ( rebuilt new last month) new bolts, braided hose, new brake pipe.

Feel pretty satisfied and pleased with myself. Just have to do the other side.

But.

The trailing arms were a bitch took ages of wiggling and jacking and a ratchet strap. I think the bushes were not the best fitted, I would recommend anyone doing this to really get the bushes in perfectly.

The tank straps with the welded bolts are different lengths which I didn't notice until I had it in and all the straps bolted in, so I had to take the tank out and start again to swap them around. I also didn't fit the tank to filler breather until it was all fitted which was also a mistake as it was tucked behind the shock turret. Very fiddly waste of 45 minutes. I also should have put the filler tube loosely in place before the tank as again a real pig to fit.

I'm also doing all this in an open ended leaky barn full of hay, 3 tractors and a 50's bus.

I have a couple questions.

There is breather pipe visible in picture. Does this just hang or does it have a routing?
The shifter cup, does this come of the linkage by taking out the drift pin up? Or down?

Regards to all.
Arun

Image
aruntaylor
 
Posts: 71
Joined: 22nd, Dec 2010

Re: Today's efforts

Postby fairwynds » 25 Mar 2014, 21:16

What van you got there? Fuel tank in back?
1.9 DG Bilbos 'Arragon' Hitop LPG'd by Gasure
1.9 TDi Golf Mk4 Estate
Member no 3288
User avatar
fairwynds
 
Posts: 749
Joined: 22nd, Jan 2007
Location: West Sussex
80-90 Mem No: 3288

Re: Today's efforts

Postby lloydy » 25 Mar 2014, 21:18

syncro
Time is a drug. Too much of it kills you
User avatar
lloydy
 
Posts: 7700
Joined: 24th, Nov 2009
Location: cheam surrey

Re: Today's efforts

Postby syncropaddy » 26 Mar 2014, 16:21

fairwynds wrote:What van you got there? Fuel tank in back?


This post is a week early!
syncropaddy


One Syncro, five Mercedes Benzs and a rocket ship
User avatar
syncropaddy
 
Posts: 888
Joined: 17th, Oct 2005
Location: Gorey, Co. Wexford, Ireland
80-90 Mem No: 1019

Re: Today's efforts

Postby garyd » 29 Mar 2014, 12:07

fairwynds wrote:What van you got there? Fuel tank in back?


Not a van at all. it has to be a Doka or Sinka with that filler pipe route.
Garyd

1990 Transporter syncro camper
2 litre AGG 'GTi' engine
User avatar
garyd
 
Posts: 411
Joined: 20th, Sep 2006
Location: Aylesbury
80-90 Mem No: 2934


Return to Syncro

Who is online

Users browsing this forum: No registered users and 13 guests

cron